Well did you know that you can directly terminate a Leased Line on a PRI card ?
Yes if you have a PRI card , you certainly can connect a leased Line (E1 : Unframed as well as Framed) provided you have a service provider's MUX in the premises.
If you do satisfy the above criteria.
Then just plug in the 4 wires from the Telco's MUX straight into the PRI card &
this is the config that will make it work
controller E1 4/0/1
channel-group 0 unframed
no shut
!
interface Serial4/0/1:0
description Connect to XYZ on leased line
ip address 10.10.10.11 255.255.255.252
no shut
No comments:
Post a Comment