sh mpls ldp neighbor

Rack1R1#sh mpls ldp neighbor
Peer TDP Ident: 124.5.2.2:0; Local TDP Ident 124.5.1.1:0
TCP connection: 124.5.2.2.11000 - 124.5.1.1.711
State: Oper; PIEs sent/rcvd: 4/4; Downstream
Up time: 00:00:40
TDP discovery sources:
ATM4/0.12, Src IP addr: 124.5.12.2
Addresses bound to peer TDP Ident:
124.5.24.2 124.5.23.2 124.5.12.2 124.5.19.2
124.5.2.2
Peer LDP Ident: 124.5.3.3:0; Local LDP Ident 124.5.1.1:0
TCP connection: 124.5.3.3.44185 - 124.5.1.1.646
State: Oper; Msgs sent/rcvd: 14/12; Downstream
Up time: 00:00:27
LDP discovery sources:
Serial2/1, Src IP addr: 124.5.13.3
Addresses bound to peer LDP Ident:
124.5.34.3 124.5.13.3 124.5.23.3 124.5.3.3
Rack1R1#

Cisco IOS folks pls change this command, it shows both LDP and TDP neighbors
Also there is no IOS command to display TDP neighbors
i.e sh mpls tdp neighbors

So the above command should be changed to reflect sh mpls neighbors